ANSIBLE TOWER SETUP
ANSIBLE TOWER SETUP
[root@localhost ansible-tower-setup-3.3.2-1]# ./setup.sh
Using /etc/ansible/ansible.cfg as config file
/root/ansible-tower-setup-3.3.2-1/inventory did not meet host_list requirements, check plugin documentation if this is unexpected
/root/ansible-tower-setup-3.3.2-1/inventory did not meet script requirements, check plugin documentation if this is unexpected
[WARNING]: Could not match supplied host pattern, ignoring: instance_group_*
1.9 MB/s | 105 MB 00:55 \nRetrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7\nRetrievingkey from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ansible-release\nRunningtransaction check\nRunning transaction test\nTransaction test succeeded\nRunning transaction\n Installing : 1:perl-Error-0.17020-2.el7.noarch 1/31 \n Installing : perl-TermReadKey-2.30-20.el7.x86_64 2/31 \n Installing : git-1.8.3.1-20.el7.x86_64 3/31 \n Installing : perl-Git-1.8.3.1-20.el7.noarch 4/31 \n Installing : libtommath-0.42.0-6.el7.x86_64 5/31 \n Installing : libtomcrypt-1.17-26.el7.x86_64 6/31 \n Installing : python2-crypto-2.6.1-15.el7.x86_64 7/31 \n Installing : 1:nginx-filesystem-1.12.2-2.el7.noarch 8/31 \n Installing : 1:nginx-mod-http-xslt-filter-1.12.2-2.el7.x86_64 9/31 \n Installing : 1:nginx-mod-stream-1.12.2-2.el7.x86_64 10/31 \n Installing : 1:nginx-mod-mail-1.12.2-2.el7.x86_64 11/31 \n Installing : 1:nginx-mod-http-image-filter-1.12.2-2.el7.x86_64 12/31 \n Installing : 1:nginx-mod-http-perl-1.12.2-2.el7.x86_64 13/31 \n Installing : 1:nginx-1.12.2-2.el7.x86_64 14/31 \n Installing : 1:nginx-mod-http-geoip-1.12.2-2.el7.x86_64 15/31 \n Installing : 1:nginx-all-modules-1.12.2-2.el7.noarch 16/31 \n Installing : bubblewrap-0.3.0-1.el7.x86_64 17/31 \n Installing : postgresql96-9.6.11-1PGDG.rhel7.x86_64 18/31 \n Installing : python-meld3-0.6.10-1.el7.x86_64 19/31 \n Installing : supervisor-3.1.4-1.el7.noarch 20/31 \n Installing : python-devel-2.7.5-76.el7.x86_64 21/31 \n Installing : python-virtualenv-15.1.0-2.el7.noarch 22/31 \n Installing : ansible-tower-venv-ansible-3.3.2-1.el7.x86_64 23/31 \n Installing : ansible-tower-venv-tower-3.3.2-1.el7.x86_64 24/31 \n Installing : memcached-1.4.15-10.el7_3.1.x86_64 25/31 \n Installing : mercurial-2.6.2-8.el7_4.x86_64 26/31 \n Installing : subversion-libs-1.7.14-14.el7.x86_64 27/31 \n Installing : subversion-1.7.14-14.el7.x86_64 28/31 \n Installing : ansible-tower-server-3.3.2-1.el7.x86_64 29/31 \ntower not found\n Installing : ansible-tower-ui-3.3.2-1.el7.x86_64 30/31 \n Installing : ansible-tower-3.3.2-1.el7.x86_64 31/31 \n Verifying : subversion-libs-1.7.14-14.el7.x86_64 1/31 \n Verifying : mercurial-2.6.2-8.el7_4.x86_64 2/31 \n Verifying : 1:nginx-mod-http-geoip-1.12.2-2.el7.x86_64 3/31 \n Verifying : ansible-tower-3.3.2-1.el7.x86_64 4/31 \n Verifying : 1:nginx-1.12.2-2.el7.x86_64 5/31 \n Verifying : 1:nginx-mod-http-xslt-filter-1.12.2-2.el7.x86_64 6/31 \n Verifying : 1:nginx-mod-stream-1.12.2-2.el7.x86_64 7/31 \n Verifying : subversion-1.7.14-14.el7.x86_64 8/31 \n Verifying : ansible-tower-venv-ansible-3.3.2-1.el7.x86_64 9/31 \n Verifying : memcached-1.4.15-10.el7_3.1.x86_64 10/31 \n Verifying : python-devel-2.7.5-76.el7.x86_64 11/31 \n Verifying : perl-Git-1.8.3.1-20.el7.noarch 12/31 \n Verifying : python-meld3-0.6.10-1.el7.x86_64 13/31 \n Verifying : postgresql96-9.6.11-1PGDG.rhel7.x86_64 14/31 \n Verifying : ansible-tower-venv-tower-3.3.2-1.el7.x86_64 15/31 \n Verifying : bubblewrap-0.3.0-1.el7.x86_64 16/31 \n Verifying : 1:nginx-all-modules-1.12.2-2.el7.noarch 17/31 \n Verifying : 1:nginx-filesystem-1.12.2-2.el7.noarch 18/31 \n Verifying : supervisor-3.1.4-1.el7.noarch 19/31 \n Verifying : 1:perl-Error-0.17020-2.el7.noarch 20/31 \n Verifying : git-1.8.3.1-20.el7.x86_64 21/31 \n Verifying : libtommath-0.42.0-6.el7.x86_64 22/31 \n Verifying : 1:nginx-mod-mail-1.12.2-2.el7.x86_64 23/31 \n Verifying : python-virtualenv-15.1.0-2.el7.noarch 24/31 \n Verifying : 1:nginx-mod-http-image-filter-1.12.2-2.el7.x86_64 25/31 \n Verifying : ansible-tower-server-3.3.2-1.el7.x86_64 26/31 \n Verifying : python2-crypto-2.6.1-15.el7.x86_64 27/31 \n Verifying : perl-TermReadKey-2.30-20.el7.x86_64 28/31 \n Verifying : 1:nginx-mod-http-perl-1.12.2-2.el7.x86_64 29/31 \n Verifying : ansible-tower-ui-3.3.2-1.el7.x86_64 30/31 \n Verifying : libtomcrypt-1.17-26.el7.x86_64 31/31 \n\nInstalled:\n ansible-tower.x86_64 0:3.3.2-1.el7 \n\nDependency Installed:\n ansible-tower-server.x86_64 0:3.3.2-1.el7 \n ansible-tower-ui.x86_64 0:3.3.2-1.el7 \n ansible-tower-venv-ansible.x86_64 0:3.3.2-1.el7 \n ansible-tower-venv-tower.x86_64 0:3.3.2-1.el7 \n bubblewrap.x86_64 0:0.3.0-1.el7 \n git.x86_64 0:1.8.3.1-20.el7 \n libtomcrypt.x86_64 0:1.17-26.el7 \n libtommath.x86_64 0:0.42.0-6.el7 \n memcached.x86_64 0:1.4.15-10.el7_3.1 \n mercurial.x86_64 0:2.6.2-8.el7_4 \n nginx.x86_64 1:1.12.2-2.el7 \n nginx-all-modules.noarch 1:1.12.2-2.el7 \n nginx-filesystem.noarch 1:1.12.2-2.el7 \n nginx-mod-http-geoip.x86_64 1:1.12.2-2.el7 \n nginx-mod-http-image-filter.x86_64 1:1.12.2-2.el7 \n nginx-mod-http-perl.x86_64 1:1.12.2-2.el7 \n nginx-mod-http-xslt-filter.x86_64 1:1.12.2-2.el7 \n nginx-mod-mail.x86_64 1:1.12.2-2.el7 \n nginx-mod-stream.x86_64 1:1.12.2-2.el7 \n perl-Error.noarch 1:0.17020-2.el7 \n perl-Git.noarch 0:1.8.3.1-20.el7 \n perl-TermReadKey.x86_64 0:2.30-20.el7 \n postgresql96.x86_64 0:9.6.11-1PGDG.rhel7 \n python-devel.x86_64 0:2.7.5-76.el7 \n python-meld3.x86_64 0:0.6.10-1.el7 \n python-virtualenv.noarch 0:15.1.0-2.el7 \n python2-crypto.x86_64 0:2.6.1-15.el7 \n subversion.x86_64 0:1.7.14-14.el7 \n subversion-libs.x86_64 0:1.7.14-14.el7 \n supervisor.noarch 0:3.1.4-1.el7 \n\nComplete!\n"]}
TASK [packages_el : Upgrade Ansible] *******************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_el : Check to see if Postgres is installed] *********************************************************************************
fatal: [localhost]: FAILED! => {"msg": "Failed to change ownership of the temporary files Ansible needs to create despite connecting as a privileged user. Unprivileged become user would be unable to read the file."}
...ignoring
TASK [packages_el : Set upgrade flag if Postgres is installed and not at version 9.6] ******************************************************
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|failed` use `result is failed`. This feature will be
removed in version 2.9. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_el : Install postgres] ******************************************************************************************************
[DEPRECATION WARNING]: Invoking "yum" only once while using a loop via squash_actions is deprecated. Instead of using a loop to supply
multiple items and specifying `name: {{ item }}`, please use `name: u'{{ postgresql_packages }}'` and remove the loop. This feature will be
removed in version 2.11. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
ok: [localhost] => (item=[u'postgresql96-server', u'postgresql96-contrib']) => {"changed": false, "item": ["postgresql96-server", "postgresql96-contrib"], "msg": "Existing lock /var/run/yum.pid: another copy is running as pid 26470.\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 161 M RSS (535 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:04 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 161 M RSS (535 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:06 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 161 M RSS (535 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:08 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 161 M RSS (535 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:10 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 161 M RSS (535 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:12 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 161 M RSS (535 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:14 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 158 M RSS (533 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:16 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 207 M RSS (581 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:18 ago\n State : Running, pid: 26470\nAnother app is currently holding the yum lock; waiting for it to exit...\n The other application is: yum\n Memory : 221 M RSS (596 MB VSZ)\n Started: Tue Dec 18 10:54:19 2018 - 01:20 ago\n State : Running, pid: 26470\n", "rc": 0, "results": ["Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-\n : manager\nPackage postgresql96-server-9.6.11-1PGDG.rhel7.x86_64 already installed and latest version\nPackage postgresql96-contrib-9.6.11-1PGDG.rhel7.x86_64 already installed and latest version\nNothing to do\n"]}
TASK [packages_el : Stop postgres 9.4] *****************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_el : init postgresql (el-only)] *********************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_el : pg_upgrade] ************************************************************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [packages_el : Uninstall Postgres 9.4] ************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : include_vars] ******************************************************************************************************
skipping: [localhost] => (item=/root/ansible-tower-setup-3.3.2-1/roles/packages_ubuntu/vars/../vars/default.yml) => {"changed": false, "item": "/root/ansible-tower-setup-3.3.2-1/roles/packages_ubuntu/vars/../vars/default.yml", "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Remove Django if installed via. apt.] ******************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : install apt repository keys] ***************************************************************************************
TASK [packages_ubuntu : Install apt repositories] ******************************************************************************************
TASK [packages_ubuntu : Install playbook dependencies] *************************************************************************************
TASK [packages_ubuntu : Check for custom ui logo] ******************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Check for custom ui settings] **************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Move away custom ui logo] ******************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Move away custom ui settings] **************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Install ubuntu Tower apt repository.] ******************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : A secret key may already exist; test if it does.] ******************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : If a secret key already exists, read it into memory.] **************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [packages_ubuntu : Install Tower package with the apt module.] ************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Upgrade Ansible] ***************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Restore the secret key.] *******************************************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [packages_ubuntu : Remove Tower apt repository configuration.] ************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Update apt cache] **************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Check to see if Postgres is installed] *****************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Set upgrade flag if Postgres is installed and not at version 9.6] **************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Install postgres] **************************************************************************************************
[DEPRECATION WARNING]: Invoking "apt" only once while using a loop via squash_actions is deprecated. Instead of using a loop to supply
multiple items and specifying `name: {{ item }}`, please use `name: [u'postgresql-9.6']` and remove the loop. This feature will be removed
in version 2.11. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
skipping: [localhost] => (item=[]) => {"changed": false, "item": [], "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Stop postgres] *****************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Symlink pg config] *************************************************************************************************
skipping: [localhost] => (item={u'dest': u'/var/lib/postgresql/9.4/main/postgresql.conf', u'src': u'/etc/postgresql/9.4/main/postgresql.conf'}) => {"changed": false, "item": {"dest": "/var/lib/postgresql/9.4/main/postgresql.conf", "src": "/etc/postgresql/9.4/main/postgresql.conf"}, "skip_reason": "Conditional result was False"}
skipping: [localhost] => (item={u'dest': u'/var/lib/postgresql/9.4/main/pg_hba.conf', u'src': u'/etc/postgresql/9.4/main/pg_hba.conf'}) => {"changed": false, "item": {"dest": "/var/lib/postgresql/9.4/main/pg_hba.conf", "src": "/etc/postgresql/9.4/main/pg_hba.conf"}, "skip_reason": "Conditional result was False"}
skipping: [localhost] => (item={u'dest': u'/var/lib/postgresql/9.6/main/postgresql.conf', u'src': u'/etc/postgresql/9.6/main/postgresql.conf'}) => {"changed": false, "item": {"dest": "/var/lib/postgresql/9.6/main/postgresql.conf", "src": "/etc/postgresql/9.6/main/postgresql.conf"}, "skip_reason": "Conditional result was False"}
skipping: [localhost] => (item={u'dest': u'/var/lib/postgresql/9.6/main/pg_hba.conf', u'src': u'/etc/postgresql/9.6/main/pg_hba.conf'}) => {"changed": false, "item": {"dest": "/var/lib/postgresql/9.6/main/pg_hba.conf", "src": "/etc/postgresql/9.6/main/pg_hba.conf"}, "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Ensure conf.d directories exists] **********************************************************************************
skipping: [localhost] => (item=/var/lib/postgresql/9.4/main/conf.d) => {"changed": false, "item": "/var/lib/postgresql/9.4/main/conf.d", "skip_reason": "Conditional result was False"}
skipping: [localhost] => (item=/var/lib/postgresql/9.6/main/conf.d) => {"changed": false, "item": "/var/lib/postgresql/9.6/main/conf.d", "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : pg_upgrade] ********************************************************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [packages_ubuntu : Uninstall Postgresql 9.4] ******************************************************************************************
[DEPRECATION WARNING]: Invoking "apt" only once while using a loop via squash_actions is deprecated. Instead of using a loop to supply
multiple items and specifying `name: {{ item }}`, please use `name: [u'postgresql-9.4', u'postgresql-client-9.4', u'postgresql-
contrib-9.4']` and remove the loop. This feature will be removed in version 2.11. Deprecation warnings can be disabled by setting
deprecation_warnings=False in ansible.cfg.
skipping: [localhost] => (item=[]) => {"changed": false, "item": [], "skip_reason": "Conditional result was False"}
TASK [packages_ubuntu : Make sure Postgres starts on the expected port] ********************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [postgres : include_vars] *************************************************************************************************************
ok: [localhost] => (item=/root/ansible-tower-setup-3.3.2-1/roles/postgres/vars/../vars/RedHat-7.yml) => {"ansible_facts": {"pg_conf_dir": "/var/lib/pgsql/9.6/data", "pg_conf_location": "{{ pg_conf_dir }}/postgresql.conf", "pg_hba_location": "{{ pg_conf_dir }}/pg_hba.conf", "pg_initdb_command": "/usr/pgsql-9.6/bin/postgresql96-setup initdb", "postgres_init_name": "postgresql-9.6"}, "ansible_included_var_files": ["/root/ansible-tower-setup-3.3.2-1/roles/postgres/vars/RedHat-7.yml"], "changed": false, "item": "/root/ansible-tower-setup-3.3.2-1/roles/postgres/vars/../vars/RedHat-7.yml"}
TASK [postgres : init postgresql (el-only)] ************************************************************************************************
changed: [localhost] => {"changed": true, "cmd": ["/usr/pgsql-9.6/bin/postgresql96-setup", "initdb"], "delta": "0:00:04.432824", "end": "2018-12-18 10:55:52.055578", "rc": 0, "start": "2018-12-18 10:55:47.622754", "stderr": "", "stderr_lines": [], "stdout": "Initializing database ... OK", "stdout_lines": ["Initializing database ... OK"]}
TASK [postgres : Make sure PostgreSQL is started] ******************************************************************************************
changed: [localhost] => {"changed": true, "name": "postgresql-9.6", "state": "started", "status": {"ActiveEnterTimestampMonotonic": "0", "ActiveExitTimestampMonotonic": "0", "ActiveState": "inactive", "After": "syslog.target network.target system.slice systemd-journald.socket basic.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "no", "AssertTimestampMonotonic": "0", "Before": "shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "yes", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "no", "ConditionTimestampMonotonic": "0", "Conflicts": "shutdown.target", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "PostgreSQL 9.6 database server", "DevicePolicy": "auto", "Documentation": "https://www.postgresql.org/docs/9.6/static/", "Environment": "PGDATA=/var/lib/pgsql/9.6/data/ PG_OOM_ADJUST_FILE=/proc/self/oom_score_adj PG_OOM_ADJUST_VALUE=0", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "0", "ExecMainStartTimestampMonotonic": "0", "ExecMainStatus": "0", "ExecReload": "{ path=/bin/kill ; argv[]=/bin/kill -HUP $MAINPID ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "ExecStart": "{ path=/usr/pgsql-9.6/bin/postmaster ; argv[]=/usr/pgsql-9.6/bin/postmaster -D ${PGDATA} ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "ExecStartPre": "{ path=/usr/pgsql-9.6/bin/postgresql96-check-db-dir ; argv[]=/usr/pgsql-9.6/bin/postgresql96-check-db-dir ${PGDATA} ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/postgresql-9.6.service", "Group": "postgres", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "postgresql-9.6.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestampMonotonic": "0", "InactiveExitTimestampMonotonic": "0", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "mixed", "KillSignal": "2", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "0", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "postgresql-9.6.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "main", "OOMScoreAdjust": "-1000", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "basic.target", "Restart": "no", "RestartUSec": "100ms", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "dead", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "18446744073709551615", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "0", "TimeoutStopUSec": "0", "TimerSlackNSec": "50000", "Transient": "no", "Type": "notify", "UMask": "0022", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "User": "postgres", "Wants": "system.slice", "WatchdogTimestampMonotonic": "0", "WatchdogUSec": "0"}}
TASK [postgres : Wait for PostgreSQL to start if it wasnt] *********************************************************************************
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|changed` use `result is changed`. This feature will
be removed in version 2.9. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
ok: [localhost] => {"changed": false, "elapsed": 0, "path": null, "port": 5432, "search_regex": null, "state": "started"}
TASK [postgres : Update postgresql authentication settings] ********************************************************************************
changed: [localhost] => {"changed": true, "checksum": "d050f8274268b3bd4037e9516b2255ff93431545", "dest": "/var/lib/pgsql/9.6/data/pg_hba.conf", "gid": 26, "group": "postgres", "md5sum": "474c18732641bbaabeeb94654d8ef50c", "mode": "0600", "owner": "postgres", "size": 451, "src": "/root/.ansible/tmp/ansible-tmp-1545110753.69-109953942326281/source", "state": "file", "uid": 26}
TASK [postgres : Apply postgresql general settings] ****************************************************************************************
changed: [localhost] => {"changed": true, "checksum": "aed338b7fc9c9ac23bb7960a51e03062d3d5c74a", "dest": "/var/lib/pgsql/9.6/data/postgresql.conf", "gid": 26, "group": "postgres", "md5sum": "d49f6cb90573c6741721d47784bf0f47", "mode": "0600", "owner": "postgres", "size": 3223, "src": "/root/.ansible/tmp/ansible-tmp-1545110754.29-11802814310941/source", "state": "file", "uid": 26}
TASK [postgres : Create unix socket directory] *********************************************************************************************
changed: [localhost] => {"changed": true, "gid": 26, "group": "postgres", "mode": "02775", "owner": "postgres", "path": "/var/run/postgresql", "size": 80, "state": "directory", "uid": 26}
TASK [postgres : Configure postgresql tmpfiles.d] ******************************************************************************************
ok: [localhost] => {"changed": false, "checksum": "241b3dff32ef1ee86c424ac3e1bf8a10217a55d5", "dest": "/usr/lib/tmpfiles.d/postgresql.conf", "gid": 0, "group": "root", "mode": "0644", "owner": "root", "path": "/usr/lib/tmpfiles.d/postgresql.conf", "size": 47, "state": "file", "uid": 0}
TASK [postgres : restart postgresql when authentication settings changed] ******************************************************************
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|changed` use `result is changed`. This feature will
be removed in version 2.9. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
changed: [localhost] => {"changed": true, "name": "postgresql-9.6", "state": "started", "status": {"ActiveEnterTimestamp": "Tue 2018-12-18 10:55:52 IST", "ActiveEnterTimestampMonotonic": "2876964187", "ActiveExitTimestampMonotonic": "0", "ActiveState": "active", "After": "system.slice syslog.target basic.target systemd-journald.socket network.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "yes", "AssertTimestamp": "Tue 2018-12-18 10:55:52 IST", "AssertTimestampMonotonic": "2876907318", "Before": "shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "yes", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "yes", "ConditionTimestamp": "Tue 2018-12-18 10:55:52 IST", "ConditionTimestampMonotonic": "2876907318", "Conflicts": "shutdown.target", "ControlGroup": "/system.slice/postgresql-9.6.service", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "PostgreSQL 9.6 database server", "DevicePolicy": "auto", "Documentation": "https://www.postgresql.org/docs/9.6/static/", "Environment": "PGDATA=/var/lib/pgsql/9.6/data/ PG_OOM_ADJUST_FILE=/proc/self/oom_score_adj PG_OOM_ADJUST_VALUE=0", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "26824", "ExecMainStartTimestamp": "Tue 2018-12-18 10:55:52 IST", "ExecMainStartTimestampMonotonic": "2876921279", "ExecMainStatus": "0", "ExecReload": "{ path=/bin/kill ; argv[]=/bin/kill -HUP $MAINPID ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "ExecStart": "{ path=/usr/pgsql-9.6/bin/postmaster ; argv[]=/usr/pgsql-9.6/bin/postmaster -D ${PGDATA} ; ignore_errors=no ; start_time=[Tue 2018-12-18 10:55:52 IST] ; stop_time=[n/a] ; pid=26824 ; code=(null) ; status=0/0 }", "ExecStartPre": "{ path=/usr/pgsql-9.6/bin/postgresql96-check-db-dir ; argv[]=/usr/pgsql-9.6/bin/postgresql96-check-db-dir ${PGDATA} ; ignore_errors=no ; start_time=[Tue 2018-12-18 10:55:52 IST] ; stop_time=[Tue 2018-12-18 10:55:52 IST] ; pid=26819 ; code=exited ; status=0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/postgresql-9.6.service", "Group": "postgres", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "postgresql-9.6.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestampMonotonic": "0", "InactiveExitTimestamp": "Tue 2018-12-18 10:55:52 IST", "InactiveExitTimestampMonotonic": "2876908167", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "mixed", "KillSignal": "2", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "26824", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "postgresql-9.6.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "main", "OOMScoreAdjust": "-1000", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "basic.target", "Restart": "no", "RestartUSec": "100ms", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "running", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "7", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "0", "TimeoutStopUSec": "0", "TimerSlackNSec": "50000", "Transient": "no", "Type": "notify", "UMask": "0022", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "User": "postgres", "Wants": "system.slice", "WatchdogTimestamp": "Tue 2018-12-18 10:55:52 IST", "WatchdogTimestampMonotonic": "2876964140", "WatchdogUSec": "0"}}
TASK [postgres : wait for postgresql restart] **********************************************************************************************
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|changed` use `result is changed`. This feature will
be removed in version 2.9. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
ok: [localhost] => {"changed": false, "elapsed": 0, "path": null, "port": 5432, "search_regex": null, "state": "started"}
TASK [postgres : configure postgresql to start automatically] ******************************************************************************
changed: [localhost] => {"changed": true, "enabled": true, "name": "postgresql-9.6", "status": {"ActiveEnterTimestamp": "Tue 2018-12-18 10:55:56 IST", "ActiveEnterTimestampMonotonic": "2880748415", "ActiveExitTimestamp": "Tue 2018-12-18 10:55:56 IST", "ActiveExitTimestampMonotonic": "2880664079", "ActiveState": "active", "After": "system.slice syslog.target basic.target systemd-journald.socket network.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "yes", "AssertTimestamp": "Tue 2018-12-18 10:55:56 IST", "AssertTimestampMonotonic": "2880680663", "Before": "shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "yes", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "yes", "ConditionTimestamp": "Tue 2018-12-18 10:55:56 IST", "ConditionTimestampMonotonic": "2880680663", "Conflicts": "shutdown.target", "ControlGroup": "/system.slice/postgresql-9.6.service", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "PostgreSQL 9.6 database server", "DevicePolicy": "auto", "Documentation": "https://www.postgresql.org/docs/9.6/static/", "Environment": "PGDATA=/var/lib/pgsql/9.6/data/ PG_OOM_ADJUST_FILE=/proc/self/oom_score_adj PG_OOM_ADJUST_VALUE=0", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "27022", "ExecMainStartTimestamp": "Tue 2018-12-18 10:55:56 IST", "ExecMainStartTimestampMonotonic": "2880696675", "ExecMainStatus": "0", "ExecReload": "{ path=/bin/kill ; argv[]=/bin/kill -HUP $MAINPID ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "ExecStart": "{ path=/usr/pgsql-9.6/bin/postmaster ; argv[]=/usr/pgsql-9.6/bin/postmaster -D ${PGDATA} ; ignore_errors=no ; start_time=[Tue 2018-12-18 10:55:56 IST] ; stop_time=[n/a] ; pid=27022 ; code=(null) ; status=0/0 }", "ExecStartPre": "{ path=/usr/pgsql-9.6/bin/postgresql96-check-db-dir ; argv[]=/usr/pgsql-9.6/bin/postgresql96-check-db-dir ${PGDATA} ; ignore_errors=no ; start_time=[Tue 2018-12-18 10:55:56 IST] ; stop_time=[Tue 2018-12-18 10:55:56 IST] ; pid=27017 ; code=exited ; status=0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/postgresql-9.6.service", "Group": "postgres", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "postgresql-9.6.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestamp": "Tue 2018-12-18 10:55:56 IST", "InactiveEnterTimestampMonotonic": "2880679878", "InactiveExitTimestamp": "Tue 2018-12-18 10:55:56 IST", "InactiveExitTimestampMonotonic": "2880681433", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "mixed", "KillSignal": "2", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "27022", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "postgresql-9.6.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "main", "OOMScoreAdjust": "-1000", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "basic.target", "Restart": "no", "RestartUSec": "100ms", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "running", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "7", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "0", "TimeoutStopUSec": "0", "TimerSlackNSec": "50000", "Transient": "no", "Type": "notify", "UMask": "0022", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "User": "postgres", "Wants": "system.slice", "WatchdogTimestamp": "Tue 2018-12-18 10:55:56 IST", "WatchdogTimestampMonotonic": "2880748370", "WatchdogUSec": "0"}}
TASK [postgres : create the postgres user and set the password] ****************************************************************************
changed: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": true}
TASK [postgres : create the postgresql database for awx] ***********************************************************************************
changed: [localhost] => {"changed": true, "db": "awx"}
TASK [firewall : Determine if firewalld is running] ****************************************************************************************
ok: [localhost] => {"changed": false, "cmd": ["firewall-cmd", "--state"], "delta": "0:00:00.843939", "end": "2018-12-18 10:56:01.041986", "failed_when_result": false, "msg": "non-zero return code", "rc": 252, "start": "2018-12-18 10:56:00.198047", "stderr": "not running", "stderr_lines": ["not running"], "stdout": "", "stdout_lines": []}
TASK [firewall : Determine if firewalld is enabled] ****************************************************************************************
ok: [localhost] => {"changed": false, "cmd": ["systemctl", "list-unit-files"], "delta": "0:00:01.449422", "end": "2018-12-18 10:56:02.857523", "rc": 0, "start": "2018-12-18 10:56:01.408101", "stderr": "", "stderr_lines": [], "stdout": "UNIT FILE STATE \nproc-sys-fs-binfmt_misc.automount static \ndev-hugepages.mount static \ndev-mqueue.mount static \nproc-fs-nfsd.mount static \nproc-sys-fs-binfmt_misc.mount static \nsys-fs-fuse-connections.mount static \nsys-kernel-config.mount static \nsys-kernel-debug.mount static \ntmp.mount disabled\nvar-lib-nfs-rpc_pipefs.mount static \nbrandbot.path enabled \ncups.path enabled \nsystemd-ask-password-console.path static \nsystemd-ask-password-plymouth.path static \nsystemd-ask-password-wall.path static \nsession-2.scope static \nabrt-ccpp.service enabled \nabrt-oops.service enabled \nabrt-pstoreoops.service disabled\nabrt-vmcore.service enabled \nabrt-xorg.service enabled \nabrtd.service enabled \naccounts-daemon.service enabled \nalsa-restore.service static \nalsa-state.service static \nanaconda-direct.service static \nanaconda-nm-config.service static \nanaconda-noshell.service static \nanaconda-pre.service static \nanaconda-shell@.service static \nanaconda-sshd.service static \nanaconda-tmux@.service static \nanaconda.service static \narp-ethers.service disabled\natd.service enabled \nauditd.service enabled \nauth-rpcgss-module.service static \nautovt@.service enabled \navahi-daemon.service enabled \nblk-availability.service disabled\nbluetooth.service enabled \nbolt.service static \nbrandbot.service static \nbrltty.service disabled\ncanberra-system-bootup.service disabled\ncanberra-system-shutdown-reboot.service disabled\ncanberra-system-shutdown.service disabled\nchrony-dnssrv@.service static \nchrony-wait.service disabled\nchronyd.service enabled \nclean-mount-point@.service static \ncolord.service static \nconfigure-printer@.service static \nconsole-getty.service disabled\nconsole-shell.service disabled\ncontainer-getty@.service static \ncpupower.service disabled\ncrond.service enabled \ncups-browsed.service disabled\ncups.service enabled \ndbus-org.bluez.service enabled \ndbus-org.freedesktop.Avahi.service enabled \ndbus-org.freedesktop.hostname1.service static \ndbus-org.freedesktop.import1.service static \ndbus-org.freedesktop.locale1.service static \ndbus-org.freedesktop.login1.service static \ndbus-org.freedesktop.machine1.service static \ndbus-org.freedesktop.ModemManager1.service enabled \ndbus-org.freedesktop.NetworkManager.service enabled \ndbus-org.freedesktop.nm-dispatcher.service enabled \ndbus-org.freedesktop.timedate1.service static \ndbus.service static \ndebug-shell.service disabled\ndisplay-manager.service enabled \ndm-event.service static \ndmraid-activation.service enabled \ndnsmasq.service disabled\ndracut-cmdline.service static \ndracut-initqueue.service static \ndracut-mount.service static \ndracut-pre-mount.service static \ndracut-pre-pivot.service static \ndracut-pre-trigger.service static \ndracut-pre-udev.service static \ndracut-shutdown.service static \nebtables.service disabled\nemergency.service static \nfcoe.service disabled\nfirewalld.service disabled\nfirstboot-graphical.service disabled\nflatpak-system-helper.service static \nfprintd.service static \nfstrim.service static \nfwupd-offline-update.service static \nfwupd.service static \nfwupdate-cleanup.service static \ngarb.service disabled\ngdm.service enabled \ngeoclue.service static \ngetty@.service enabled \ngssproxy.service disabled\nhalt-local.service static \nhtcacheclean.service static \nhttpd.service enabled \nhypervfcopyd.service static \nhypervkvpd.service static \nhypervvssd.service static \ninitial-setup-graphical.service disabled\ninitial-setup-reconfiguration.service enabled \ninitial-setup-text.service disabled\ninitial-setup.service disabled\ninitrd-cleanup.service static \ninitrd-parse-etc.service static \ninitrd-switch-root.service static \ninitrd-udevadm-cleanup-db.service static \ninstperf.service static \niprdump.service disabled\niprinit.service disabled\niprupdate.service disabled\nipsec.service disabled\nirqbalance.service enabled \niscsi-shutdown.service static \niscsi.service enabled \niscsid.service disabled\niscsiuio.service disabled\nkdump.service enabled \nkmod-static-nodes.service static \nkpatch.service disabled\nksm.service enabled \nksmtuned.service enabled \nlibstoragemgmt.service enabled \nlibvirtd.service enabled \nlldpad.service disabled\nlvm2-lvmetad.service static \nlvm2-lvmpolld.service static \nlvm2-monitor.service enabled \nlvm2-pvscan@.service static \nmariadb.service disabled\nmaxscale.service enabled \nmcelog.service enabled \nmdadm-grow-continue@.service static \nmdadm-last-resort@.service static \nmdmon@.service static \nmdmonitor.service enabled \nmemcached.service disabled\nmessagebus.service static \nmicrocode.service enabled \nModemManager.service enabled \nmultipathd.service enabled \nndctl-monitor.service disabled\nnetcf-transaction.service disabled\nNetworkManager-dispatcher.service enabled \nNetworkManager-wait-online.service enabled \nNetworkManager.service enabled \nnfs-blkmap.service disabled\nnfs-config.service static \nnfs-idmap.service static \nnfs-idmapd.service static \nnfs-lock.service static \nnfs-mountd.service static \nnfs-rquotad.service disabled\nnfs-secure.service static \nnfs-server.service disabled\nnfs-utils.service static \nnfs.service disabled\nnfslock.service static \nnginx.service disabled\nntpdate.service disabled\nnumad.service disabled\noddjobd.service disabled\npackagekit-offline-update.service static \npackagekit.service static \npgpool.service disabled\nplymouth-halt.service disabled\nplymouth-kexec.service disabled\nplymouth-poweroff.service disabled\nplymouth-quit-wait.service disabled\nplymouth-quit.service disabled\nplymouth-read-write.service disabled\nplymouth-reboot.service disabled\nplymouth-start.service disabled\nplymouth-switch-root.service static \npolkit.service static \npostfix.service enabled \npostgresql-9.6.service enabled \npostgresql.service disabled\npsacct.service disabled\nqemu-guest-agent.service enabled \nquotaon.service static \nrabbitmq-server.service disabled\nradvd.service disabled\nras-mc-ctl.service disabled\nrasdaemon.service disabled\nrc-local.service static \nrdisc.service disabled\nrdma-load-modules@.service static \nrdma-ndd.service static \nrdma.service disabled\nrealmd.service static \nrescue.service static \nrhel-autorelabel-mark.service enabled \nrhel-autorelabel.service enabled \nrhel-configure.service enabled \nrhel-dmesg.service enabled \nrhel-domainname.service enabled \nrhel-import-state.service enabled \nrhel-loadmodules.service enabled \nrhel-readonly.service enabled \nrhsm-facts.service disabled\nrhsm.service disabled\nrhsmcertd.service enabled \nrngd.service enabled \nrpc-gssd.service static \nrpc-rquotad.service disabled\nrpc-statd-notify.service static \nrpc-statd.service static \nrpcbind.service enabled \nrpcgssd.service static \nrpcidmapd.service static \nrsyncd.service disabled\nrsyncd@.service static \nrsyslog.service enabled \nrtkit-daemon.service enabled \nsaned@.service indirect\nsaslauthd.service disabled\nselinux-policy-migrate-local-changes@.service static \nserial-getty@.service disabled\nsmartd.service enabled \nspeech-dispatcherd.service disabled\nspice-vdagentd.service indirect\nsshd-keygen.service static \nsshd.service enabled \nsshd@.service static \nsupervisord.service disabled\nsvnserve.service disabled\nsysstat.service enabled \nsystemd-ask-password-console.service static \nsystemd-ask-password-plymouth.service static \nsystemd-ask-password-wall.service static \nsystemd-backlight@.service static \nsystemd-binfmt.service static \nsystemd-bootchart.service disabled\nsystemd-firstboot.service static \nsystemd-fsck-root.service static \nsystemd-fsck@.service static \nsystemd-halt.service static \nsystemd-hibernate-resume@.service static \nsystemd-hibernate.service static \nsystemd-hostnamed.service static \nsystemd-hwdb-update.service static \nsystemd-hybrid-sleep.service static \nsystemd-importd.service static \nsystemd-initctl.service static \nsystemd-journal-catalog-update.service static \nsystemd-journal-flush.service static \nsystemd-journald.service static \nsystemd-kexec.service static \nsystemd-localed.service static \nsystemd-logind.service static \nsystemd-machine-id-commit.service static \nsystemd-machined.service static \nsystemd-modules-load.service static \nsystemd-nspawn@.service disabled\nsystemd-poweroff.service static \nsystemd-quotacheck.service static \nsystemd-random-seed.service static \nsystemd-readahead-collect.service enabled \nsystemd-readahead-done.service indirect\nsystemd-readahead-drop.service enabled \nsystemd-readahead-replay.service enabled \nsystemd-reboot.service static \nsystemd-remount-fs.service static \nsystemd-rfkill@.service static \nsystemd-shutdownd.service static \nsystemd-suspend.service static \nsystemd-sysctl.service static \nsystemd-timedated.service static \nsystemd-tmpfiles-clean.service static \nsystemd-tmpfiles-setup-dev.service static \nsystemd-tmpfiles-setup.service static \nsystemd-udev-settle.service static \nsystemd-udev-trigger.service static \nsystemd-udevd.service static \nsystemd-update-done.service static \nsystemd-update-utmp-runlevel.service static \nsystemd-update-utmp.service static \nsystemd-user-sessions.service static \nsystemd-vconsole-setup.service static \ntcsd.service disabled\nteamd@.service static \ntuned.service enabled \nudisks2.service enabled \nunbound-anchor.service static \nupower.service disabled\nusb_modeswitch@.service static \nusbmuxd.service static \nvdo.service enabled \nvgauthd.service enabled \nvirtlockd.service indirect\nvirtlogd.service indirect\nvmtoolsd.service enabled \nwacom-inputattach@.service static \nwpa_supplicant.service disabled\nzram.service static \n-.slice static \nmachine.slice static \nsystem.slice static \nuser-0.slice static \nuser.slice static \navahi-daemon.socket enabled \ncups.socket enabled \ndbus.socket static \ndm-event.socket enabled \niscsid.socket enabled \niscsiuio.socket enabled \nlldpad.socket disabled\nlvm2-lvmetad.socket enabled \nlvm2-lvmpolld.socket enabled \nrpcbind.socket enabled \nrsyncd.socket disabled\nsaned.socket disabled\nspice-vdagentd.socket enabled \nsshd.socket disabled\nsyslog.socket static \nsystemd-initctl.socket static \nsystemd-journald.socket static \nsystemd-shutdownd.socket static \nsystemd-udevd-control.socket static \nsystemd-udevd-kernel.socket static \nvirtlockd-admin.socket disabled\nvirtlockd.socket enabled \nvirtlogd-admin.socket disabled\nvirtlogd.socket enabled \nanaconda.target static \nbasic.target static \nbluetooth.target static \ncryptsetup-pre.target static \ncryptsetup.target static \nctrl-alt-del.target disabled\ndefault.target enabled \nemergency.target static \nfinal.target static \ngetty-pre.target static \ngetty.target static \ngraphical.target enabled \nhalt.target disabled\nhibernate.target static \nhybrid-sleep.target static \ninitrd-fs.target static \ninitrd-root-fs.target static \ninitrd-switch-root.target static \ninitrd.target static \niprutils.target disabled\nkexec.target disabled\nlocal-fs-pre.target static \nlocal-fs.target static \nmachines.target disabled\nmulti-user.target static \nnetwork-online.target static \nnetwork-pre.target static \nnetwork.target static \nnfs-client.target enabled \nnss-lookup.target static \nnss-user-lookup.target static \npaths.target static \npoweroff.target disabled\nprinter.target static \nrdma-hw.target static \nreboot.target disabled\nremote-cryptsetup.target disabled\nremote-fs-pre.target static \nremote-fs.target enabled \nrescue.target disabled\nrpc_pipefs.target static \nrpcbind.target static \nrunlevel0.target disabled\nrunlevel1.target disabled\nrunlevel2.target static \nrunlevel3.target static \nrunlevel4.target static \nrunlevel5.target enabled \nrunlevel6.target disabled\nshutdown.target static \nsigpwr.target static \nsleep.target static \nslices.target static \nsmartcard.target static \nsockets.target static \nsound.target static \nsuspend.target static \nswap.target static \nsysinit.target static \nsystem-update.target static \ntime-sync.target static \ntimers.target static \numount.target static \nvirt-guest-shutdown.target static \nchrony-dnssrv@.timer disabled\nfstrim.timer disabled\nmdadm-last-resort@.timer static \nsystemd-readahead-done.timer indirect\nsystemd-tmpfiles-clean.timer static \nunbound-anchor.timer enabled \n\n403 unit files listed.", "stdout_lines": ["UNIT FILE STATE ", "proc-sys-fs-binfmt_misc.automount static ", "dev-hugepages.mount static ", "dev-mqueue.mount static ", "proc-fs-nfsd.mount static ", "proc-sys-fs-binfmt_misc.mount static ", "sys-fs-fuse-connections.mount static ", "sys-kernel-config.mount static ", "sys-kernel-debug.mount static ", "tmp.mount disabled", "var-lib-nfs-rpc_pipefs.mount static ", "brandbot.path enabled ", "cups.path enabled ", "systemd-ask-password-console.path static ", "systemd-ask-password-plymouth.path static ", "systemd-ask-password-wall.path static ", "session-2.scope static ", "abrt-ccpp.service enabled ", "abrt-oops.service enabled ", "abrt-pstoreoops.service disabled", "abrt-vmcore.service enabled ", "abrt-xorg.service enabled ", "abrtd.service enabled ", "accounts-daemon.service enabled ", "alsa-restore.service static ", "alsa-state.service static ", "anaconda-direct.service static ", "anaconda-nm-config.service static ", "anaconda-noshell.service static ", "anaconda-pre.service static ", "anaconda-shell@.service static ", "anaconda-sshd.service static ", "anaconda-tmux@.service static ", "anaconda.service static ", "arp-ethers.service disabled", "atd.service enabled ", "auditd.service enabled ", "auth-rpcgss-module.service static ", "autovt@.service enabled ", "avahi-daemon.service enabled ", "blk-availability.service disabled", "bluetooth.service enabled ", "bolt.service static ", "brandbot.service static ", "brltty.service disabled", "canberra-system-bootup.service disabled", "canberra-system-shutdown-reboot.service disabled", "canberra-system-shutdown.service disabled", "chrony-dnssrv@.service static ", "chrony-wait.service disabled", "chronyd.service enabled ", "clean-mount-point@.service static ", "colord.service static ", "configure-printer@.service static ", "console-getty.service disabled", "console-shell.service disabled", "container-getty@.service static ", "cpupower.service disabled", "crond.service enabled ", "cups-browsed.service disabled", "cups.service enabled ", "dbus-org.bluez.service enabled ", "dbus-org.freedesktop.Avahi.service enabled ", "dbus-org.freedesktop.hostname1.service static ", "dbus-org.freedesktop.import1.service static ", "dbus-org.freedesktop.locale1.service static ", "dbus-org.freedesktop.login1.service static ", "dbus-org.freedesktop.machine1.service static ", "dbus-org.freedesktop.ModemManager1.service enabled ", "dbus-org.freedesktop.NetworkManager.service enabled ", "dbus-org.freedesktop.nm-dispatcher.service enabled ", "dbus-org.freedesktop.timedate1.service static ", "dbus.service static ", "debug-shell.service disabled", "display-manager.service enabled ", "dm-event.service static ", "dmraid-activation.service enabled ", "dnsmasq.service disabled", "dracut-cmdline.service static ", "dracut-initqueue.service static ", "dracut-mount.service static ", "dracut-pre-mount.service static ", "dracut-pre-pivot.service static ", "dracut-pre-trigger.service static ", "dracut-pre-udev.service static ", "dracut-shutdown.service static ", "ebtables.service disabled", "emergency.service static ", "fcoe.service disabled", "firewalld.service disabled", "firstboot-graphical.service disabled", "flatpak-system-helper.service static ", "fprintd.service static ", "fstrim.service static ", "fwupd-offline-update.service static ", "fwupd.service static ", "fwupdate-cleanup.service static ", "garb.service disabled", "gdm.service enabled ", "geoclue.service static ", "getty@.service enabled ", "gssproxy.service disabled", "halt-local.service static ", "htcacheclean.service static ", "httpd.service enabled ", "hypervfcopyd.service static ", "hypervkvpd.service static ", "hypervvssd.service static ", "initial-setup-graphical.service disabled", "initial-setup-reconfiguration.service enabled ", "initial-setup-text.service disabled", "initial-setup.service disabled", "initrd-cleanup.service static ", "initrd-parse-etc.service static ", "initrd-switch-root.service static ", "initrd-udevadm-cleanup-db.service static ", "instperf.service static ", "iprdump.service disabled", "iprinit.service disabled", "iprupdate.service disabled", "ipsec.service disabled", "irqbalance.service enabled ", "iscsi-shutdown.service static ", "iscsi.service enabled ", "iscsid.service disabled", "iscsiuio.service disabled", "kdump.service enabled ", "kmod-static-nodes.service static ", "kpatch.service disabled", "ksm.service enabled ", "ksmtuned.service enabled ", "libstoragemgmt.service enabled ", "libvirtd.service enabled ", "lldpad.service disabled", "lvm2-lvmetad.service static ", "lvm2-lvmpolld.service static ", "lvm2-monitor.service enabled ", "lvm2-pvscan@.service static ", "mariadb.service disabled", "maxscale.service enabled ", "mcelog.service enabled ", "mdadm-grow-continue@.service static ", "mdadm-last-resort@.service static ", "mdmon@.service static ", "mdmonitor.service enabled ", "memcached.service disabled", "messagebus.service static ", "microcode.service enabled ", "ModemManager.service enabled ", "multipathd.service enabled ", "ndctl-monitor.service disabled", "netcf-transaction.service disabled", "NetworkManager-dispatcher.service enabled ", "NetworkManager-wait-online.service enabled ", "NetworkManager.service enabled ", "nfs-blkmap.service disabled", "nfs-config.service static ", "nfs-idmap.service static ", "nfs-idmapd.service static ", "nfs-lock.service static ", "nfs-mountd.service static ", "nfs-rquotad.service disabled", "nfs-secure.service static ", "nfs-server.service disabled", "nfs-utils.service static ", "nfs.service disabled", "nfslock.service static ", "nginx.service disabled", "ntpdate.service disabled", "numad.service disabled", "oddjobd.service disabled", "packagekit-offline-update.service static ", "packagekit.service static ", "pgpool.service disabled", "plymouth-halt.service disabled", "plymouth-kexec.service disabled", "plymouth-poweroff.service disabled", "plymouth-quit-wait.service disabled", "plymouth-quit.service disabled", "plymouth-read-write.service disabled", "plymouth-reboot.service disabled", "plymouth-start.service disabled", "plymouth-switch-root.service static ", "polkit.service static ", "postfix.service enabled ", "postgresql-9.6.service enabled ", "postgresql.service disabled", "psacct.service disabled", "qemu-guest-agent.service enabled ", "quotaon.service static ", "rabbitmq-server.service disabled", "radvd.service disabled", "ras-mc-ctl.service disabled", "rasdaemon.service disabled", "rc-local.service static ", "rdisc.service disabled", "rdma-load-modules@.service static ", "rdma-ndd.service static ", "rdma.service disabled", "realmd.service static ", "rescue.service static ", "rhel-autorelabel-mark.service enabled ", "rhel-autorelabel.service enabled ", "rhel-configure.service enabled ", "rhel-dmesg.service enabled ", "rhel-domainname.service enabled ", "rhel-import-state.service enabled ", "rhel-loadmodules.service enabled ", "rhel-readonly.service enabled ", "rhsm-facts.service disabled", "rhsm.service disabled", "rhsmcertd.service enabled ", "rngd.service enabled ", "rpc-gssd.service static ", "rpc-rquotad.service disabled", "rpc-statd-notify.service static ", "rpc-statd.service static ", "rpcbind.service enabled ", "rpcgssd.service static ", "rpcidmapd.service static ", "rsyncd.service disabled", "rsyncd@.service static ", "rsyslog.service enabled ", "rtkit-daemon.service enabled ", "saned@.service indirect", "saslauthd.service disabled", "selinux-policy-migrate-local-changes@.service static ", "serial-getty@.service disabled", "smartd.service enabled ", "speech-dispatcherd.service disabled", "spice-vdagentd.service indirect", "sshd-keygen.service static ", "sshd.service enabled ", "sshd@.service static ", "supervisord.service disabled", "svnserve.service disabled", "sysstat.service enabled ", "systemd-ask-password-console.service static ", "systemd-ask-password-plymouth.service static ", "systemd-ask-password-wall.service static ", "systemd-backlight@.service static ", "systemd-binfmt.service static ", "systemd-bootchart.service disabled", "systemd-firstboot.service static ", "systemd-fsck-root.service static ", "systemd-fsck@.service static ", "systemd-halt.service static ", "systemd-hibernate-resume@.service static ", "systemd-hibernate.service static ", "systemd-hostnamed.service static ", "systemd-hwdb-update.service static ", "systemd-hybrid-sleep.service static ", "systemd-importd.service static ", "systemd-initctl.service static ", "systemd-journal-catalog-update.service static ", "systemd-journal-flush.service static ", "systemd-journald.service static ", "systemd-kexec.service static ", "systemd-localed.service static ", "systemd-logind.service static ", "systemd-machine-id-commit.service static ", "systemd-machined.service static ", "systemd-modules-load.service static ", "systemd-nspawn@.service disabled", "systemd-poweroff.service static ", "systemd-quotacheck.service static ", "systemd-random-seed.service static ", "systemd-readahead-collect.service enabled ", "systemd-readahead-done.service indirect", "systemd-readahead-drop.service enabled ", "systemd-readahead-replay.service enabled ", "systemd-reboot.service static ", "systemd-remount-fs.service static ", "systemd-rfkill@.service static ", "systemd-shutdownd.service static ", "systemd-suspend.service static ", "systemd-sysctl.service static ", "systemd-timedated.service static ", "systemd-tmpfiles-clean.service static ", "systemd-tmpfiles-setup-dev.service static ", "systemd-tmpfiles-setup.service static ", "systemd-udev-settle.service static ", "systemd-udev-trigger.service static ", "systemd-udevd.service static ", "systemd-update-done.service static ", "systemd-update-utmp-runlevel.service static ", "systemd-update-utmp.service static ", "systemd-user-sessions.service static ", "systemd-vconsole-setup.service static ", "tcsd.service disabled", "teamd@.service static ", "tuned.service enabled ", "udisks2.service enabled ", "unbound-anchor.service static ", "upower.service disabled", "usb_modeswitch@.service static ", "usbmuxd.service static ", "vdo.service enabled ", "vgauthd.service enabled ", "virtlockd.service indirect", "virtlogd.service indirect", "vmtoolsd.service enabled ", "wacom-inputattach@.service static ", "wpa_supplicant.service disabled", "zram.service static ", "-.slice static ", "machine.slice static ", "system.slice static ", "user-0.slice static ", "user.slice static ", "avahi-daemon.socket enabled ", "cups.socket enabled ", "dbus.socket static ", "dm-event.socket enabled ", "iscsid.socket enabled ", "iscsiuio.socket enabled ", "lldpad.socket disabled", "lvm2-lvmetad.socket enabled ", "lvm2-lvmpolld.socket enabled ", "rpcbind.socket enabled ", "rsyncd.socket disabled", "saned.socket disabled", "spice-vdagentd.socket enabled ", "sshd.socket disabled", "syslog.socket static ", "systemd-initctl.socket static ", "systemd-journald.socket static ", "systemd-shutdownd.socket static ", "systemd-udevd-control.socket static ", "systemd-udevd-kernel.socket static ", "virtlockd-admin.socket disabled", "virtlockd.socket enabled ", "virtlogd-admin.socket disabled", "virtlogd.socket enabled ", "anaconda.target static ", "basic.target static ", "bluetooth.target static ", "cryptsetup-pre.target static ", "cryptsetup.target static ", "ctrl-alt-del.target disabled", "default.target enabled ", "emergency.target static ", "final.target static ", "getty-pre.target static ", "getty.target static ", "graphical.target enabled ", "halt.target disabled", "hibernate.target static ", "hybrid-sleep.target static ", "initrd-fs.target static ", "initrd-root-fs.target static ", "initrd-switch-root.target static ", "initrd.target static ", "iprutils.target disabled", "kexec.target disabled", "local-fs-pre.target static ", "local-fs.target static ", "machines.target disabled", "multi-user.target static ", "network-online.target static ", "network-pre.target static ", "network.target static ", "nfs-client.target enabled ", "nss-lookup.target static ", "nss-user-lookup.target static ", "paths.target static ", "poweroff.target disabled", "printer.target static ", "rdma-hw.target static ", "reboot.target disabled", "remote-cryptsetup.target disabled", "remote-fs-pre.target static ", "remote-fs.target enabled ", "rescue.target disabled", "rpc_pipefs.target static ", "rpcbind.target static ", "runlevel0.target disabled", "runlevel1.target disabled", "runlevel2.target static ", "runlevel3.target static ", "runlevel4.target static ", "runlevel5.target enabled ", "runlevel6.target disabled", "shutdown.target static ", "sigpwr.target static ", "sleep.target static ", "slices.target static ", "smartcard.target static ", "sockets.target static ", "sound.target static ", "suspend.target static ", "swap.target static ", "sysinit.target static ", "system-update.target static ", "time-sync.target static ", "timers.target static ", "umount.target static ", "virt-guest-shutdown.target static ", "chrony-dnssrv@.timer disabled", "fstrim.timer disabled", "mdadm-last-resort@.timer static ", "systemd-readahead-done.timer indirect", "systemd-tmpfiles-clean.timer static ", "unbound-anchor.timer enabled ", "", "403 unit files listed."]}
TASK [firewall : Determine if iptables is installed] ***************************************************************************************
ok: [localhost] => {"changed": false, "cmd": ["iptables", "--version"], "delta": "0:00:00.032261", "end": "2018-12-18 10:56:03.322382", "failed_when_result": false, "rc": 0, "start": "2018-12-18 10:56:03.290121", "stderr": "", "stderr_lines": [], "stdout": "iptables v1.4.21", "stdout_lines": ["iptables v1.4.21"]}
TASK [firewall : Determine if iptables service is installed] *******************************************************************************
ok: [localhost] => {"changed": false, "stat": {"exists": false}}
TASK [firewall : Check to see if there is an iptables config file] *************************************************************************
ok: [localhost] => {"changed": false, "stat": {"exists": false}}
TASK [firewall : Select firewalld] *********************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [firewall : Select iptables] **********************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [firewall : Include no tasks] *********************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [rabbitmq : check whether rabbitmq is already reachable as a node] ********************************************************************
fatal: [localhost]: FAILED! => {"changed": false, "cmd": ["rabbitmqctl", "-n", "rabbitmq@localhost", "status"], "delta": "0:00:01.419873", "end": "2018-12-18 10:56:06.287199", "msg": "non-zero return code", "rc": 69, "start": "2018-12-18 10:56:04.867326", "stderr": "Error: unable to perform an operation on node 'rabbitmq@localhost'. Please see diagnostics information and suggestions below.\n\nMost common reasons for this are:\n\n * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)\n * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)\n * Target node is not running\n\nIn addition to the diagnostics info below:\n\n * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more\n * Consult server logs on node rabbitmq@localhost\n\nDIAGNOSTICS\n===========\n\nattempted to contact: [rabbitmq@localhost]\n\nrabbitmq@localhost:\n * connected to epmd (port 4369) on localhost\n * epmd reports: node 'rabbitmq' not running at all\n no other nodes on localhost\n * suggestion: start the node\n\nCurrent node details:\n * node name: rabbitmqcli86@localhost\n * effective user's home directory: /var/lib/rabbitmq\n * Erlang cookie hash: fJ1T46EL70v9EzhDaUrfgA==", "stderr_lines": ["Error: unable to perform an operation on node 'rabbitmq@localhost'. Please see diagnostics information and suggestions below.", "", "Most common reasons for this are:", "", " * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)", " * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)", " * Target node is not running", "", "In addition to the diagnostics info below:", "", " * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more", " * Consult server logs on node rabbitmq@localhost", "", "DIAGNOSTICS", "===========", "", "attempted to contact: [rabbitmq@localhost]", "", "rabbitmq@localhost:", " * connected to epmd (port 4369) on localhost", " * epmd reports: node 'rabbitmq' not running at all", " no other nodes on localhost", " * suggestion: start the node", "", "Current node details:", " * node name: rabbitmqcli86@localhost", " * effective user's home directory: /var/lib/rabbitmq", " * Erlang cookie hash: fJ1T46EL70v9EzhDaUrfgA=="], "stdout": "Status of node rabbitmq@localhost ...", "stdout_lines": ["Status of node rabbitmq@localhost ..."]}
...ignoring
TASK [rabbitmq : stop the rabbitmq service before updating the nodename] *******************************************************************
ok: [localhost] => {"changed": false, "name": "rabbitmq-server", "state": "stopped", "status": {"ActiveEnterTimestampMonotonic": "0", "ActiveExitTimestampMonotonic": "0", "ActiveState": "inactive", "After": "systemd-journald.socket -.mount syslog.target system.slice network.target basic.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "no", "AssertTimestampMonotonic": "0", "Before": "shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "no", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "no", "ConditionTimestampMonotonic": "0", "Conflicts": "shutdown.target", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "RabbitMQ broker", "DevicePolicy": "auto", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "0", "ExecMainStartTimestampMonotonic": "0", "ExecMainStatus": "0", "ExecStart": "{ path=/usr/sbin/rabbitmq-server ; argv[]=/usr/sbin/rabbitmq-server ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "ExecStop": "{ path=/usr/sbin/rabbitmqctl ; argv[]=/usr/sbin/rabbitmqctl shutdown ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/rabbitmq-server.service", "Group": "rabbitmq", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "rabbitmq-server.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestampMonotonic": "0", "InactiveExitTimestampMonotonic": "0", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "control-group", "KillSignal": "15", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "0", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "rabbitmq-server.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "all", "OOMScoreAdjust": "0", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "-.mount basic.target", "RequiresMountsFor": "/var/lib/rabbitmq", "Restart": "on-failure", "RestartUSec": "10s", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "dead", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "18446744073709551615", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "1h", "TimeoutStopUSec": "1min 30s", "TimerSlackNSec": "50000", "Transient": "no", "Type": "notify", "UMask": "0027", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "User": "rabbitmq", "Wants": "system.slice", "WatchdogTimestampMonotonic": "0", "WatchdogUSec": "0", "WorkingDirectory": "/var/lib/rabbitmq"}}
TASK [rabbitmq : Disable all RabbitMQ plugins before upgrade] ******************************************************************************
ok: [localhost] => {"changed": false, "path": "/etc/rabbitmq/enabled_plugins", "state": "absent"}
TASK [rabbitmq : Reset RabbitMQ database] **************************************************************************************************
changed: [localhost] => {"changed": true, "path": "/var/lib/rabbitmq/mnesia", "state": "absent"}
TASK [rabbitmq : Apply RabbitMQ environment Node Name] *************************************************************************************
changed: [localhost] => {"changed": true, "checksum": "5f2a6fa07ed6589903903539594714592d7656ab", "dest": "/etc/rabbitmq/rabbitmq-env.conf", "gid": 981, "group": "rabbitmq", "md5sum": "7bcb5ade6a6ae5ba26e8aa3af3c4485f", "mode": "0640", "owner": "rabbitmq", "size": 153, "src": "/root/.ansible/tmp/ansible-tmp-1545110767.66-92268196453502/source", "state": "file", "uid": 987}
TASK [rabbitmq : Apply RabbitMQ Configuration] *********************************************************************************************
changed: [localhost] => {"changed": true, "checksum": "d92b27270795385e4832bb076da29d216b3040f2", "dest": "/etc/rabbitmq/rabbitmq.conf", "gid": 981, "group": "rabbitmq", "md5sum": "965d2528bed964e7bf664eab11db0af8", "mode": "0640", "owner": "rabbitmq", "size": 95, "src": "/root/.ansible/tmp/ansible-tmp-1545110768.25-131967704110136/source", "state": "file", "uid": 987}
TASK [rabbitmq : Apply RabbitMQ Cookie] ****************************************************************************************************
changed: [localhost] => {"changed": true, "checksum": "64b1b9f36607ff04be7ef6e88e416b54c557d713", "dest": "/var/lib/rabbitmq/.erlang.cookie", "gid": 981, "group": "rabbitmq", "md5sum": "6adeb5f54399cec7a7178e2d48adee94", "mode": "0600", "owner": "rabbitmq", "size": 13, "src": "/root/.ansible/tmp/ansible-tmp-1545110768.82-72142501733459/source", "state": "file", "uid": 987}
TASK [rabbitmq : start and enable the rabbitmq service] ************************************************************************************
changed: [localhost] => {"changed": true, "enabled": true, "name": "rabbitmq-server", "state": "started", "status": {"ActiveEnterTimestampMonotonic": "0", "ActiveExitTimestampMonotonic": "0", "ActiveState": "inactive", "After": "systemd-journald.socket system.slice syslog.target -.mount basic.target network.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "no", "AssertTimestampMonotonic": "0", "Before": "shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "no", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "no", "ConditionTimestampMonotonic": "0", "Conflicts": "shutdown.target", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "RabbitMQ broker", "DevicePolicy": "auto", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "0", "ExecMainStartTimestampMonotonic": "0", "ExecMainStatus": "0", "ExecStart": "{ path=/usr/sbin/rabbitmq-server ; argv[]=/usr/sbin/rabbitmq-server ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "ExecStop": "{ path=/usr/sbin/rabbitmqctl ; argv[]=/usr/sbin/rabbitmqctl shutdown ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/rabbitmq-server.service", "Group": "rabbitmq", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "rabbitmq-server.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestampMonotonic": "0", "InactiveExitTimestampMonotonic": "0", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "control-group", "KillSignal": "15", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "0", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "rabbitmq-server.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "all", "OOMScoreAdjust": "0", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "-.mount basic.target", "RequiresMountsFor": "/var/lib/rabbitmq", "Restart": "on-failure", "RestartUSec": "10s", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "dead", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "18446744073709551615", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "1h", "TimeoutStopUSec": "1min 30s", "TimerSlackNSec": "50000", "Transient": "no", "Type": "notify", "UMask": "0027", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "User": "rabbitmq", "Wants": "system.slice", "WatchdogTimestampMonotonic": "0", "WatchdogUSec": "0", "WorkingDirectory": "/var/lib/rabbitmq"}}
TASK [rabbitmq : wait for rabbitmq service to be running] **********************************************************************************
ok: [localhost] => {"changed": false, "elapsed": 0, "path": null, "port": 5672, "search_regex": null, "state": "started"}
TASK [rabbitmq : Activate rabbitmq plugins] ************************************************************************************************
changed: [localhost] => {"changed": true, "disabled": [], "enabled": ["rabbitmq_management", "rabbitmq_management_agent", "rabbitmq_federation", "rabbitmq_federation_management"]}
TASK [rabbitmq : create the rabbitmq vhost] ************************************************************************************************
changed: [localhost] => {"changed": true, "name": "tower", "state": "present"}
TASK [rabbitmq : Set Cluster HA Policy] ****************************************************************************************************
changed: [localhost] => {"changed": true, "cmd": "rabbitmqctl set_policy ha-all \".*\" '{\"ha-mode\":\"all\", \"ha-sync-mode\":\"automatic\"}' -p tower", "delta": "0:00:00.997965", "end": "2018-12-18 10:56:53.492431", "rc": 0, "start": "2018-12-18 10:56:52.494466", "stderr": "", "stderr_lines": [], "stdout": "Setting policy \"ha-all\" for pattern \".*\" to \"{\"ha-mode\":\"all\", \"ha-sync-mode\":\"automatic\"}\" with priority \"0\" for vhost \"tower\" ...", "stdout_lines": ["Setting policy \"ha-all\" for pattern \".*\" to \"{\"ha-mode\":\"all\", \"ha-sync-mode\":\"automatic\"}\" with priority \"0\" for vhost \"tower\" ..."]}
TASK [rabbitmq : Stop rabbitmq app if we arent the first node] *****************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [rabbitmq : Set Primary RabbitMQ hostname] ********************************************************************************************
ok: [localhost] => {"ansible_facts": {"rabbitmq_real_host": "localhost"}, "changed": false}
TASK [rabbitmq : Cluster all nodes to the first node] **************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [rabbitmq : Start rabbitmq app if we arent the first node] ****************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [rabbitmq : create the rabbitmq user] *************************************************************************************************
changed: [localhost] => {"changed": true, "state": "present", "user": "tower"}
TASK [rabbitmq : Set rabbitmq administrator status] ****************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [memcached : include memcached variables] *********************************************************************************************
ok: [localhost] => (item=/root/ansible-tower-setup-3.3.2-1/roles/memcached/vars/../vars/default.yml) => {"ansible_facts": {"memcached_user": "memcached"}, "ansible_included_var_files": ["/root/ansible-tower-setup-3.3.2-1/roles/memcached/vars/default.yml"], "changed": false, "item": "/root/ansible-tower-setup-3.3.2-1/roles/memcached/vars/../vars/default.yml"}
TASK [memcached : Create memcached socket directory on boot (14.04 only)] ******************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [memcached : shell] *******************************************************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [memcached : ensure /var/run/memcached exists] ****************************************************************************************
ok: [localhost] => {"changed": false, "gid": 978, "group": "memcached", "mode": "0750", "owner": "memcached", "path": "/var/run/memcached", "size": 40, "state": "directory", "uid": 984}
TASK [memcached : Create tmpfiles.d entry for memcached socket directory] ******************************************************************
changed: [localhost] => {"changed": true, "checksum": "e6429fd7b42a9e59927d86d65c240ec8ea0c5558", "dest": "/etc/tmpfiles.d/memcached.conf", "gid": 0, "group": "root", "md5sum": "ae54ceaed2afc70a53473b20fdaeab79", "mode": "0640", "owner": "root", "size": 48, "src": "/root/.ansible/tmp/ansible-tmp-1545110819.72-172015706804840/source", "state": "file", "uid": 0}
TASK [memcached : bind memcached to a unix domain socket (non-Debian)] *********************************************************************
changed: [localhost] => {"backup": "", "changed": true, "msg": "line replaced"}
TASK [memcached : bind memcached to a unix domain socket (Debian)] *************************************************************************
skipping: [localhost] => (item={u'prefix': u'-s', u'value': u'/var/run/memcached/memcached.sock'}) => {"changed": false, "item": {"prefix": "-s", "value": "/var/run/memcached/memcached.sock"}, "skip_reason": "Conditional result was False"}
skipping: [localhost] => (item={u'prefix': u'-a', u'value': u'0660'}) => {"changed": false, "item": {"prefix": "-a", "value": "0660"}, "skip_reason": "Conditional result was False"}
TASK [memcached : restart memcached when bind settings changed] ****************************************************************************
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|changed` use `result is changed`. This feature will
be removed in version 2.9. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
changed: [localhost] => {"changed": true, "name": "memcached", "state": "started", "status": {"ActiveEnterTimestampMonotonic": "0", "ActiveExitTimestampMonotonic": "0", "ActiveState": "inactive", "After": "basic.target systemd-journald.socket system.slice network.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "no", "AssertTimestampMonotonic": "0", "Before": "httpd.service shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "no", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "no", "ConditionTimestampMonotonic": "0", "Conflicts": "shutdown.target", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "Memcached", "DevicePolicy": "auto", "EnvironmentFile": "/etc/sysconfig/memcached (ignore_errors=yes)", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "0", "ExecMainStartTimestampMonotonic": "0", "ExecMainStatus": "0", "ExecStart": "{ path=/usr/bin/memcached ; argv[]=/usr/bin/memcached -u $USER -p $PORT -m $CACHESIZE -c $MAXCONN $OPTIONS ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/memcached.service", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "memcached.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestampMonotonic": "0", "InactiveExitTimestampMonotonic": "0", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "control-group", "KillSignal": "15", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "0", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "memcached.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "none", "OOMScoreAdjust": "0", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "basic.target", "Restart": "no", "RestartUSec": "100ms", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "dead", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "18446744073709551615", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "1min 30s", "TimeoutStopUSec": "1min 30s", "TimerSlackNSec": "50000", "Transient": "no", "Type": "simple", "UMask": "0022", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "Wants": "system.slice", "WatchdogTimestampMonotonic": "0", "WatchdogUSec": "0"}}
TASK [memcached : add awx to the memcached group so it can access the socket] **************************************************************
changed: [localhost] => {"append": true, "changed": true, "comment": "", "group": 979, "groups": "memcached", "home": "/var/lib/awx", "move_home": false, "name": "awx", "shell": "/bin/bash", "state": "present", "uid": 985}
TASK [memcached : Start Memcached and enable it at startup] ********************************************************************************
changed: [localhost] => {"changed": true, "enabled": true, "name": "memcached", "state": "started", "status": {"ActiveEnterTimestamp": "Tue 2018-12-18 10:57:01 IST", "ActiveEnterTimestampMonotonic": "2945597662", "ActiveExitTimestampMonotonic": "0", "ActiveState": "active", "After": "basic.target systemd-journald.socket system.slice network.target", "AllowIsolate": "no", "AmbientCapabilities": "0", "AssertResult": "yes", "AssertTimestamp": "Tue 2018-12-18 10:57:01 IST", "AssertTimestampMonotonic": "2945596560", "Before": "httpd.service shutdown.target", "BlockIOAccounting": "no", "BlockIOWeight": "18446744073709551615", "CPUAccounting": "no", "CPUQuotaPerSecUSec": "infinity", "CPUSchedulingPolicy": "0", "CPUSchedulingPriority": "0", "CPUSchedulingResetOnFork": "no", "CPUShares": "18446744073709551615", "CanIsolate": "no", "CanReload": "no", "CanStart": "yes", "CanStop": "yes", "CapabilityBoundingSet": "18446744073709551615", "ConditionResult": "yes", "ConditionTimestamp": "Tue 2018-12-18 10:57:01 IST", "ConditionTimestampMonotonic": "2945596560", "Conflicts": "shutdown.target", "ControlGroup": "/system.slice/memcached.service", "ControlPID": "0", "DefaultDependencies": "yes", "Delegate": "no", "Description": "Memcached", "DevicePolicy": "auto", "EnvironmentFile": "/etc/sysconfig/memcached (ignore_errors=yes)", "ExecMainCode": "0", "ExecMainExitTimestampMonotonic": "0", "ExecMainPID": "29821", "ExecMainStartTimestamp": "Tue 2018-12-18 10:57:01 IST", "ExecMainStartTimestampMonotonic": "2945597571", "ExecMainStatus": "0", "ExecStart": "{ path=/usr/bin/memcached ; argv[]=/usr/bin/memcached -u $USER -p $PORT -m $CACHESIZE -c $MAXCONN $OPTIONS ; ignore_errors=no ; start_time=[Tue 2018-12-18 10:57:01 IST] ; stop_time=[n/a] ; pid=29821 ; code=(null) ; status=0/0 }", "FailureAction": "none", "FileDescriptorStoreMax": "0", "FragmentPath": "/usr/lib/systemd/system/memcached.service", "GuessMainPID": "yes", "IOScheduling": "0", "Id": "memcached.service", "IgnoreOnIsolate": "no", "IgnoreOnSnapshot": "no", "IgnoreSIGPIPE": "yes", "InactiveEnterTimestampMonotonic": "0", "InactiveExitTimestamp": "Tue 2018-12-18 10:57:01 IST", "InactiveExitTimestampMonotonic": "2945597662", "JobTimeoutAction": "none", "JobTimeoutUSec": "0", "KillMode": "control-group", "KillSignal": "15", "LimitAS": "18446744073709551615", "LimitCORE": "18446744073709551615", "LimitCPU": "18446744073709551615", "LimitDATA": "18446744073709551615", "LimitFSIZE": "18446744073709551615", "LimitLOCKS": "18446744073709551615", "LimitMEMLOCK": "65536", "LimitMSGQUEUE": "819200", "LimitNICE": "0", "LimitNOFILE": "4096", "LimitNPROC": "14950", "LimitRSS": "18446744073709551615", "LimitRTPRIO": "0", "LimitRTTIME": "18446744073709551615", "LimitSIGPENDING": "14950", "LimitSTACK": "18446744073709551615", "LoadState": "loaded", "MainPID": "29821", "MemoryAccounting": "no", "MemoryCurrent": "18446744073709551615", "MemoryLimit": "18446744073709551615", "MountFlags": "0", "Names": "memcached.service", "NeedDaemonReload": "no", "Nice": "0", "NoNewPrivileges": "no", "NonBlocking": "no", "NotifyAccess": "none", "OOMScoreAdjust": "0", "OnFailureJobMode": "replace", "PermissionsStartOnly": "no", "PrivateDevices": "no", "PrivateNetwork": "no", "PrivateTmp": "no", "ProtectHome": "no", "ProtectSystem": "no", "RefuseManualStart": "no", "RefuseManualStop": "no", "RemainAfterExit": "no", "Requires": "basic.target", "Restart": "no", "RestartUSec": "100ms", "Result": "success", "RootDirectoryStartOnly": "no", "RuntimeDirectoryMode": "0755", "SameProcessGroup": "no", "SecureBits": "0", "SendSIGHUP": "no", "SendSIGKILL": "yes", "Slice": "system.slice", "StandardError": "inherit", "StandardInput": "null", "StandardOutput": "journal", "StartLimitAction": "none", "StartLimitBurst": "5", "StartLimitInterval": "10000000", "StartupBlockIOWeight": "18446744073709551615", "StartupCPUShares": "18446744073709551615", "StatusErrno": "0", "StopWhenUnneeded": "no", "SubState": "running", "SyslogLevelPrefix": "yes", "SyslogPriority": "30", "SystemCallErrorNumber": "0", "TTYReset": "no", "TTYVHangup": "no", "TTYVTDisallocate": "no", "TasksAccounting": "no", "TasksCurrent": "6", "TasksMax": "18446744073709551615", "TimeoutStartUSec": "1min 30s", "TimeoutStopUSec": "1min 30s", "TimerSlackNSec": "50000", "Transient": "no", "Type": "simple", "UMask": "0022", "UnitFilePreset": "disabled", "UnitFileState": "disabled", "Wants": "system.slice", "WatchdogTimestamp": "Tue 2018-12-18 10:57:01 IST", "WatchdogTimestampMonotonic": "2945597631", "WatchdogUSec": "0"}}
TASK [awx_install : include_vars] **********************************************************************************************************
ok: [localhost] => (item=/root/ansible-tower-setup-3.3.2-1/roles/awx_install/vars/../../supervisor/vars/RedHat-7.yml) => {"ansible_facts": {"sup_celery_add_lang": false, "sup_conf_location": "/etc/supervisord.d/tower.ini", "sup_init_name": "supervisord", "sup_socket_location": "/var/run/supervisor/supervisor.sock"}, "ansible_included_var_files": ["/root/ansible-tower-setup-3.3.2-1/roles/supervisor/vars/RedHat-7.yml"], "changed": false, "item": "/root/ansible-tower-setup-3.3.2-1/roles/awx_install/vars/../../supervisor/vars/RedHat-7.yml"}
TASK [awx_install : include task specific variables] ***************************************************************************************
ok: [localhost] => {"ansible_facts": {"service_path": "/sbin/service", "tower_sysconfig_path": "/etc/sysconfig/ansible-tower"}, "ansible_included_var_files": ["/root/ansible-tower-setup-3.3.2-1/roles/awx_install/vars/RedHat.yml"], "changed": false}
TASK [awx_install : Configure the Tower settings directory.] *******************************************************************************
changed: [localhost] => {"changed": true, "gid": 979, "group": "awx", "mode": "0755", "owner": "root", "path": "/etc/tower", "size": 24, "state": "directory", "uid": 0}
TASK [awx_install : Configure the Tower system user's home directory.] *********************************************************************
ok: [localhost] => {"changed": false, "gid": 979, "group": "awx", "mode": "0755", "owner": "awx", "path": "/var/lib/awx", "size": 70, "state": "directory", "uid": 985}
TASK [awx_install : Configure the Tower system user's .ssh directory.] *********************************************************************
changed: [localhost] => {"changed": true, "gid": 979, "group": "awx", "mode": "0700", "owner": "awx", "path": "/var/lib/awx/.ssh", "size": 6, "state": "directory", "uid": 985}
TASK [awx_install : Configure the Tower projects directory.] *******************************************************************************
changed: [localhost] => {"changed": true, "gid": 979, "group": "awx", "mode": "0750", "owner": "awx", "path": "/var/lib/awx/projects", "size": 6, "state": "directory", "uid": 985}
TASK [awx_install : Configure the Tower job output directory.] *****************************************************************************
changed: [localhost] => {"changed": true, "gid": 979, "group": "awx", "mode": "0750", "owner": "awx", "path": "/var/lib/awx/job_status", "size": 6, "state": "directory", "uid": 985}
TASK [awx_install : Configure the Tower static directory.] *********************************************************************************
changed: [localhost] => {"changed": true, "gid": 979, "group": "awx", "mode": "0755", "owner": "root", "path": "/var/lib/awx/public/static", "size": 6, "state": "directory", "uid": 0}
TASK [awx_install : Add Towers `conf.d` directory.] ****************************************************************************************
changed: [localhost] => {"changed": true, "gid": 979, "group": "awx", "mode": "0750", "owner": "root", "path": "/etc/tower/conf.d", "size": 6, "state": "directory", "uid": 0}
TASK [awx_install : configure tower log directory] *****************************************************************************************
ok: [localhost] => {"changed": false, "gid": 979, "group": "awx", "mode": "0750", "owner": "awx", "path": "/var/log/tower", "size": 6, "state": "directory", "uid": 985}
TASK [awx_install : update ansible-tower service configuration] ****************************************************************************
changed: [localhost] => {"changed": true, "checksum": "a9459ce3a5f9bbfa4cfb55433300b509838e3a48", "dest": "/etc/sysconfig/ansible-tower", "gid": 0, "group": "root", "md5sum": "15ace221c24e22e027f683bac2bc14b4", "mode": "0644", "owner": "root", "size": 197, "src": "/root/.ansible/tmp/ansible-tmp-1545110826.56-240645469603257/source", "state": "file", "uid": 0}
TASK [awx_install : Fetch the secret key from the primary node.] ***************************************************************************
ok: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [awx_install : Fail play when grabbing SECRET_KEY fails] ******************************************************************************
skipping: [localhost] => {"changed": false, "skip_reason": "Conditional result was False"}
TASK [awx_install : Place the secret key on secondary nodes.] ******************************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [awx_install : Get tower db settings] *************************************************************************************************
ok: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [awx_install : Ingest database settings] **********************************************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [awx_install : Set database vars] *****************************************************************************************************
ok: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [awx_install : Set database vars] *****************************************************************************************************
skipping: [localhost] => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
TASK [awx_install : Configure Towers database settings.] ***********************************************************************************
changed: [localhost] => {"changed": true, "checksum": "c3efa44b7a6d5557c98fe23e529051954dbd6625", "dest": "/etc/tower/conf.d/postgres.py", "gid": 979, "group": "awx", "md5sum": "d69ad5d7172070858e553a81012ba7bc", "mode": "0640", "owner": "root", "size": 284, "src": "/root/.ansible/tmp/ansible-tmp-1545110835.92-95314351406059/source", "state": "file", "uid": 0}
TASK [awx_install : Configure Towers celeryd settings.] ************************************************************************************
changed: [localhost] => {"changed": true, "checksum": "13adea4f0b65c9dc2578be8fb050a703ab0aba95", "dest": "/etc/tower/conf.d/celeryd.py", "gid": 979, "group": "awx", "md5sum": "0f881267e55324dfbce5b1fd3c5a68de", "mode": "0640", "owner": "root", "size": 299, "src": "/root/.ansible/tmp/ansible-tmp-1545110836.65-145038614128005/source", "state": "file", "uid": 0}
TASK [awx_install : Initialize instance groups for host] ***********************************************************************************
ok: [localhost] => {"ansible_facts": {"awx_instance_groups": []}, "changed": false}
TASK [awx_install : Determine instance groups for host] ************************************************************************************
[DEPRECATION WARNING]: Using tests as filters is deprecated. Instead of using `result|match` use `result is match`. This feature will be
removed in version 2.9. Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
skipping: [localhost] => (item=RedHat-7.6) => {"changed": false, "item": "RedHat-7.6", "skip_reason": "Conditional result was False"}
skipping: [localhost] => (item=supported) => {"changed": false, "item": "supported", "skip_reason": "Conditional result was False"}
ok: [localhost] => (item=tower) => {"ansible_facts": {"awx_instance_groups": ["tower"]}, "changed": false, "item": "tower"}
TASK [awx_install : Install Tower rabbitmq settings] **************************************************************************************
PLAY [Install Tower isolated node(s)] ******************************************************************************************************
skipping: no hosts matched
PLAY RECAP *********************************************************************************************************************************
localhost : ok=132 changed=27 unreachable=0 failed=0
The setup process completed successfully.
Setup log saved to /var/log/tower/setup-2018-12-18-11:03:40.log
You have new mail in /var/spool/mail/root
Comments
Post a Comment